© Copyright 2008. Hall Research, Inc. All rights reserved. 1163 Warner Ave Tustin, CA 92780, Ph: (714)641-6607, Fax (714)641-6698 Model UD2A
8 Model UD-2A-EDID 4.2.2.4 Disable output boost: Output boost can also be disabled for the output signal equalization over a long cabling when desir
DVI Extender with EDID, Audio & Serial Control 9 4.2.2.6 Blank output: To blank the video output. C o m m a n d ...
10 Model UD-2A-EDID 4.2.2.9 Display main menu: To display the RS232 serial command menu C o m m a n d ... R
DVI Extender with EDID, Audio & Serial Control 11 4.3.2 Running the GUI software The Main window will display when the GUI is run. The communic
12 Model UD-2A-EDID Once the communication is established between the UD2A-EDID software and the UD2A-EDID-S, the Main window should display the cur
DVI Extender with EDID, Audio & Serial Control 13 Figure 6 – EDID Info The UD2A-EDID software allows the user to either save the displa
14 Model UD-2A-EDID 5.0 Connection Chart The UD2A-EDID-S will support the following resolutions and maximum cable lengths. Cable Type Cat5E Cat6 P
DVI Extender with EDID, Audio & Serial Control 15 6.0 Troubleshooting Make sure that all of the connections to the units are solid, and check th
16 Model UD-2A-EDID
Product Designed and Made in the USA © Copyright 2010. Hall Research, Inc. All rights reserved. 1163 Warner Ave., Tust
1 DVI Extender with EDID, Audio & Serial Control Table of Contents 1.0 General ...
2 Model UD-2A-EDID 1.0 General Thank you for purchasing Hall Research’s UD2A-EDID. This is a versatile, high performance DVI extender with EDID mana
DVI Extender with EDID, Audio & Serial Control 3 3.0 Installation 3.1 Required Cables The video cables are DVI male to male. The audio cables a
4 Model UD-2A-EDID Select the desired EDID routing path using the front panel buttons, through RS-232 serial commands, or GUI software. UD2A-EDID R
DVI Extender with EDID, Audio & Serial Control 5 OUTPUT DVI Connector into the “EMULATE LEARNED” memory and save it for future use. Use the EDID
6 Model UD-2A-EDID 4.2.1 Configure HyperTerminal - Connect direct to COM1, COM2, or any available COM port - 4800 Baud, 8 bits, No Parity, 1 Stop
DVI Extender with EDID, Audio & Serial Control 7 4.2.2 Control Codes (1-byte commands from external control device) 4.2.2.1 Select EDID Routing
Comments to this Manuals