Hall-research UV8-S User Manual download pdf (Page 6)

Model UV4-S and UV8-S

2. Installation

2.1 Package Contents

Your package should contain the following items:

(1) UV4-S or UV8-S

(1) Universal power supply (9 VDC) with IEC320 Power Cord

(1) 6 ft HD15-M-M VGA cable

(1) User manual

(1) Screwdriver

2.2 Connection to Compatible Receivers

The UV4-S and UV8-S units have a single UTP cable connection to Hall Research’s

UV1-R receiver product line.

 Connect the UTP cable from the UV1-R receiver to the “UTP OUT”

connectors of the UV4-S or UV8-S.

 Connect the HD15 - “PC/HD IN” connector to the video source. For YPbPr

video sources, use a 3-RCA to HD15 cable (Hall Research P/N CHD15-

RGB).

 Connect the HD15-“PC/HD OUT” connector to a compatible video display.

 Connect the included power supply to the center positive +9 VDC power

input connector on the UV4-S or UV8-S.

o If the UTP cable to the UV1-R receiver is

longer than 330 ft (100m) then a power

supply may be needed at the receiver

(sold separately HR Model # 511-GS569).

 Never use any other power supply as this may

damage the device.

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Hall-research UV8-S User Manual Page 6