© Copyright 2010. Hall Research Technologies, Inc. All rights reserved.1163 Warner Ave Tustin, CA 92780 Ph: (714)641-6607 Fax: (714)641-6698
8 Hall Research Technologies, Inc. Technical Note about the Audio Inputs Since the audio inputs are unbalanced (single ended), the ground reference
9 Genesis™ Matrix Switches PART NUMBER UV1-S Mini-Cat, VGA over CAT5 Sender Includes Power Supply. Can also be powered via Cat5 from Receiver o
10 Hall Research Technologies, Inc. PART NUMBER UVA-WP VGA + Audio Sender on a single-gang Wallplate. Has one RJ45 output. Comes with Power supp
11 Genesis™ Matrix Switches 2.2.1 AV outputs on standard unit The video output connectors on the basic unit are HD15 female. These are compatible
12 Hall Research Technologies, Inc. Figure 6 – Matrix Switch with UTP outputs 2.2.2.1 RJ45 output with Video and Power (JP) Matrices with JP outp
13 Genesis™ Matrix Switches PART NUMBER URA UTP (CAT5) VGA + Audio Receiver. Cable compensation to 1000 ft URA-X2 UTP (CAT5) VGA + Audio Recei
14 Hall Research Technologies, Inc. purchase a compatible power cord or use an adapter. The Matrix supports both 110 V, 60 Hz and 220 V, 50 Hz powe
15 Genesis™ Matrix Switches 2.4.1.1 Primary RS-232 Control Port This is a 3-terminal captive screw input. A detachable mating connector is provided
16 Hall Research Technologies, Inc. 2.4.2 Units with IP control Matrices with the letter ‘I’ in the control block of the part number are equipped w
17 Genesis™ Matrix Switches All of the front panel switches have built-in LEDs that help in the operation. The functions of front panel are careful
18 Hall Research Technologies, Inc. … To View from output side Press and release any output button, the backlit LED of that button will light, and
19 Genesis™ Matrix Switches When you are done viewing ties, to exit you can hit ENTER. If you don’t hit any buttons, then after 8 sec the view func
20 Hall Research Technologies, Inc. 3.1.2.1 Making a tie by Input Video and Audio to follow each other Make sure both VID and AUD LEDs are lit, ind
21 Genesis™ Matrix Switches Video only or Audio only Press and release the AUD and/or VID buttons so that the backlit LED of the desired button is
22 Hall Research Technologies, Inc. 3.1.7 To set the audio output level to high (+4dBu) This function is applicable to units with Pro Audio option
23 Genesis™ Matrix Switches 3.1.8.1 Using the Front Panel VU meter All units with audio option have this feature. Enter the audio adjustment mode a
24 Hall Research Technologies, Inc. 3.1.8.2 Adjusting the input audio Gain or attenuation Enter the audio adjustment mode as described above. Ini
25 Genesis™ Matrix Switches 3.2 Control Commands (RS-232 and IP) The Genesis™ Matrices can be controlled via an external control system by using ei
26 Hall Research Technologies, Inc. 3.2.1 Naming Functions The matrix unit can be named. Its name can be up to 10 characters long. To assign or re
27 Genesis™ Matrix Switches 3.2.2.2 To make an audio tie: Command: CAn,m<cr> stands for Connect Audio n = output, m= input Note: Unit ac
1 Genesis™ Matrix Switches Table of Contents ABOUT THIS MANUAL ...
28 Hall Research Technologies, Inc. Note: Restore Factory command will clear all ties, presets, schedule settings, and unit name. -AP units with in
29 Genesis™ Matrix Switches 3.2.8 To Read Volume Units (VU sound level) of output #1 This command returns the height of hypothetical bar LED indica
30 Hall Research Technologies, Inc. 3.2.12 Real Time Clock Functions 3.2.12.1 To read or set date & time: Command: DS<cr> stands for
31 Genesis™ Matrix Switches 3.2.12.3 To read or set a schedule Command: SS<cr> stands for Schedule Set (current schedule is displayed) Re
32 Hall Research Technologies, Inc. Primary RS-232 Control IP or Secondary RS-232 Control Processor Out 1Out2Out 3Out 16UART Out Buffer In Buffer
33 Genesis™ Matrix Switches To send commands out to the remote device (1~16), the user can issue a transmit command followed by a string of charact
34 Hall Research Technologies, Inc. Matrix Command Processing Port 1001 Port 23 IP SetupSerial Control IP Control RS-232 PortThe matrix stores the
35 Genesis™ Matrix Switches Port 1001 by default is used to control the matrix (this port number can be changed as part of the IP Settings). The co
36 Hall Research Technologies, Inc. OK ... if command completed successfully. Error...
37 Genesis™ Matrix Switches If you change the IP address, Subnet mask, etc., the changes do not take effect unless you reboot the unit. You can do
2 Hall Research Technologies, Inc. 3.1.2 Making Audio and Video Routings or “Ties” ... 19 3.1.2.1
38 Hall Research Technologies, Inc. 5. To get the current gateway IP address: Command: <CTRL-B> GGI <CR> Response: <CTRL-B> A 19
39 Genesis™ Matrix Switches Note on IP Settings through port 23 If you are unable to access the unit’s port 23 from your PC using the matrix’s def
40 Hall Research Technologies, Inc. 4.0 Maintenance and Troubleshooting 4.1 Maintenance The matrix will flash the CHECK button LED constantly if on
41 Genesis™ Matrix Switches 5.0 Specifications Video Inputs 8 or 16 HD15 female connectors Video Outputs 8 or 16 HD15 female connectors Reso
42 Hall Research Technologies, Inc. Appendix 1 – Front Panel Quick Reference Guide Figure 18 – Control buttons on the front panel Function
43 Genesis™ Matrix Switches Appendix 2 – Command Summary Command Function COn,m Connect Output (both A&V). n = output, m= input Omitting
44 Hall Research Technologies, Inc.
Product Designed and Made in the USA
3 Genesis™ Matrix Switches 3.2.12.1 To read or set date & time:...
4 Hall Research Technologies, Inc. About This Manual This user’s manual covers several variations of the Hall Research Genesis™ 8x8 and 16x16 VGA/H
5 Genesis™ Matrix Switches 1.0 General The Genesis™ series refers to compact, high-end matrix switches for video and audio. The matrices are used f
6 Hall Research Technologies, Inc. 2.0 Installation The matrix is housed in a 2RU 19” wide rack mountable enclosure. All of I/O, control, and the p
7 Genesis™ Matrix Switches Technical Note about the Video Inputs The HD15 inputs of the matrix handle only the color and sync signals. EDID (extend
Comments to this Manuals